Filament guide with PTFE tube

Filament guide with clamping PTFE tube for wall or shelf mounting. Remix from Prusa original part “filament-guide-R2.stl”.

Following additional parts are needed:

• 2x mini spax 
• 1x Inbus screw M3x10
• 1x M3 nut
• PTFE/Teflon tube, outer diameter 10mm, length 7,5 mm

Tools are needed: phillips screwdriver, allen key

Step 1: insert the tube into the filamant guide

Step 2: insert the m3 nut into the filament guide, then rotate 180°

Step 3: insert the m3x10 screw into the filament guide and tighten carefully until the tube is clamped in place

Step 4: screw the filament guide somewhere where it suits you (shelf, wall...)