Unicorn-Headband-Insert

The original Headband was nice, but lacking in customizeability. 

So I designed inserts. 

Print them at 99.7-100% Scale depending on the tolerances of your Printer. Also a little bit of glue can help to keep em where they are. (If they are too loose)

If you use a gyroid Pattern and no Bottom or Top layers you can get "see-through"-inserts" 

The tiny Top piece needs more clearance than the rest of the model, so I added this as an extra to tinker around with.

Pla works fine for the inserts, you may want to print the Headband out of petg for longer durability.

get the Headband model here:

https://www.printables.com/de/model/480331-unicorn-headband/files