McTetris Sauce Cup Stand

The NcNugget Tetris handheld from China is quite popular on the internet these days. I got a couple of them as well. But it's kinda sad when it lies flat on a table not resembling what it should. So here's some of my creativity.

====Label Printing====

I've attached the label of a recreation of my favorite sauce.

Print it at 1200DPI and you'll get the proper size.

To create your own label, scan a label and double its size (size is 92x118mm)

I then glued the printed label to a piece of tin foil to recreate the material of the original label.

Before the glue dries, wrap it around a cylinder to have that curved shape.

Then with a piece of double-sided tape, attach it to the model itself.

====3D Printing====

Print the cup upside down. Preferably in white or black.

Print the sauce with the flat side facing down in the color of your choice of your favorite sauce!

Align and glue the two pieces together to complete. A model as an optional alignment tool is provided.

---- Advanced Printing ----

You can print the sauce piece directly on top of the cup with some gimmick.

After printing the cup, print the base from the Advanced folder. Sit the cup right side up in it, then print the sauce model on top of it. Make sure all models are set to the X-Y origins.

OR

You can use the all-in-one mode with the base and the sauce in a single STL. However you need to remember to insert a filament change at the right height for a pause to insert the cup and swap in the colored filament.