Old King Thor

So here we go: Marvel's old King Thor. You can probably also pass him off as a Odin since he's got, y'know, one eye and all. I've been debating with myself whether or not to release this one because no matter what I do I can't get him to that point where I normally go, "okay, this is good enough, I can't justify working more on this one!". But I did promise I would release it, and a promise is a promise, and I hope you guys and gals are happy with him the way he is!

I did some test prints at around 50% and I didn't have any issues without supports on FDM, but I did use the customary 10% rectilinear infill, which seemed to work pretty well:

The key on the base has pretty generous tolerances so it's not meant to keep the model attached to it alone. It's meant to guide the model into the right place for gluing it in place, or just take a little chunk of Blu Tack and put it into the keyhole and squeeze it into place should be good enough. I wish I'd actually take my own advice on this since I neither glue nor Blu Tack my own pieces, to sometimes less than good results...