Omni-Man

Printing information

So this one can be a bit tricky if you choose to print the version with the arms. I made versions with a longer and shorter cape, and also a simplified version that prints very easily on FDM without any external supports at all, but if you want to go with the version with arms I think the only way to do it is to put the whole thing on supports.

Capes complicate matters, and super heroes shouldn't have them, they are just stupid and suck in a really bad way.

For the resin crowd I have included a Lychee Lite (.lyt) file with supports for the longer cape version, but it pretty much filled my Mono X from top to bottom, and the supports are way overkill because I was terrified of the print failing, so I don't really recommend using it! Most likely you will want to pick the shorter cape version and add your own supports to that one!

The base comes in both one solid piece, and a three part version which might be of use if you want to print the parts at an angle.