BMS Racing JS-2 HDZero TPU

(Hi, My names is DimsimFPV and i know i like printables more than thingiverse so i am butting these prints up here and all my future mods to the js2 as well, this is not my work but is of BMSRACING********)

These are the JS-2 HDZero Official BMS Racing Designed TPU Parts.

If you don't have access to a 3D printer, please consider supporting us by purchasing these components through official JS-2 Resellers

Important Printing Information
There are a number of variations of TPU on the market, from very soft rubbery filament through to stiffer TPU, Much like SainSmart TPU etc you need to use the stiffer material for the JS-2

The TPU Parts on the JS-2 provide protection to not only the components in the roll cage but also the roll cage itself. It's designed to absorb impact and hence you need to not only pay attention to the filament used but also the fill and and wall thickness used in your prints.

We use 0.4mm Print Head, using a wall thickness of 1.2mm with an In Fill density of 10%

You shouldn't need any supports for printing these parts. The main pod has built in support sections that you should be able to break off, it allows you to print it more easily without needing to use supports

For more information on this frame and assembly refer to https://bmsfpv.com