Camera arm for X-axis (Prusa I3MK3s+). Smallest camera with Sony video chip

I like monitoring my 3D prints with Webcams (nozzle-cam) etc. 
I found this tiny webcam that has despite of its small size a high quality Sony video chip built in. I chose the 1080p 30fps model with autofocus.

https://global-survaq-store.com/products/etc2?variant=41323772084429 
 

I printed my model in an upright position with the camera on top. I added a few paint on supports in the cable outlet of the camera part. 

PETG (Prusament jet black), 0,4mm Revo Nozzle, 0,20mm layer height for quality. 
The arm is mounted with a 10mm M3 hex screw (you have plenty of them in the spare parts bag.

The camera slides in the preformed hole an stays fixed without a screw or glue. It’s a tight fit. You may strap on the USB cable with up to three zippiest using the preformed slits. 

These are the images you get with this cam:

Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments.   I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so. 
And of course a like ♥ or a rating ⭐ of the design are always welcome. 

happy printing, clamikra