August 16, 2023
Description
Dial for changing clothes dryer settings on the Electrolux clothes dryer model CRER7900AS0 and similar. The hole in the bottom was made a little small intentionally, allowing for trimming with a knife to get a nice tight fit regardless of your printer configuration/settings.
Since the dryer gets a little warm, I would err on the side of using a filament with a higher tolerance for heat than “normal” PLA.
The internal shape of the dial does not require support, and the dial should be printed flat on its bottom (assuming you are using a filament based printer.)
License:
Creative Commons — Public Domain
arleegee
