Lunar lander base for Moon Lamp

I've made a lunar lander inspired base for the 8 inch moon lamp.
I've printed it in copper PLA.

I was inspired by the Apollo 11 Eagle lander.

Print it up side down and use the socket template to build your own socket for E14 or E27.

For top and bottom layer I used "Octagram spiral" for a nice symmetric effect.

The Moon sits on the base, therfore I made the whole in the moon bigger (~66mm).

Print Settings

Resolution

0.2mm or thinner

Supports

Yes

Infill

20%

Rafts

Doesn't Matter

Filament

Geetech PLA Copper 
 

Notes

Print up side down.

To modify the socket template for your needs, please edit the socket-template in the 3D editor of your choice. In my case, I've modelled the lamp socket in 3D and used it to cut a hole into the socket-template. Finally I've cutted the socket-template in two halfs and printed it.