Cable clamp lock down

I used this to secure an AMS cable power cable in an enclosure. I'm worried about sound, so I designed this to press-fit the TPU parts snugly to create a very tight seal. I've not tested for water tightness, YMMV.

This is designed to fit over top of a 1.25" hole. Parametric model included.

Assembly

• Put your cables through all the holes first
  1. TPU Gasket
  2. Back
  3. TPU plug
  4. Shell

Getting the cable into the plug can be tricky. I made some temporary wedges with plastic sheets I had lying around.

Push all the parts together once your cables are threaded where you want them to be. Then attach it to a wall through the holes. I used 2-½" sheet metal screws.