Low Poly Floating Shark Sculpture

I designed this model after having a print fail right after a bridging layer, and being impressed with how bendy and stable the structure was with so little holding it together. This led me to put that into a design on purpose, and out came this!

Printing both models in one print, the strings will need to be placed together with the shark and waves model. Double check and make extra sure they are printed VERY slowly as to not droop or lose them. I used my normal bridging setting but you may want to do even slower.

The strings should also work placed on the buildplate, if you can mange to get them off. Textured PEI means I can't reliably test that without snapping them