MP5 Vise Block

Vise block for MP5s. Has been tested to work with HK SP5, MKE AP5-P and a Zenith ZF5-P.

There is an overhang that prints where the mag catch is. If you are having issues with the mag seating; you can clean up the edge with an Xacto. I err'ed on the side of a tight fit.

I used Ray Liu's MP5 magazine file as a base but it needed a fair bit of work to fit an actual MP5 magwell.

Print Settings:

I usually do 5 perimeters and %40+ infill with Esun PLA+

The more solid of a print, the better.