Maytag dishwasher wheel and pin

This is a wheel and the locking pin for a Maytag dishwasher lower tray.

Print Settings

Printer Brand:

Printrbot

Printer: 

Simple Black

Rafts:

No

Supports: 

No

Resolution:

.2mm layer

Infill: 

20 - 25%

Notes:

I suggest printing the pin at 70% infill.

The pin may be slightly too large to fit the hole. This is on purpose. The reason this part is needed is due to the old pin no longer fitting in the hole. Lightly sand the pin until it will snap into place with moderate fingertip pressure.

ABS works fine in the hot dishwasher.

Category: Kitchen & Dining