March 14, 2024
Description
Update: Added a version without the mini cards if you don't need those.
Do you have credit or debit cards that you may own but rarely use? How about airline and hotel loyalty cards? Grocery cards? Dining rewards cards? You get the idea…lots of credit-card sized cards that you don't necessarily use often…but you need to be able to get to them on those occasions when you do.
Well, that's what I designed this model for since I have a very shallow pull out drawer in my home office.
My model is slim at under an inch tall (25mm) and can fit virtually anywhere. See the illustration in the photos for full dimensions.
Three full size slots hold at least 60 cards (about 20-25 cards per slot). Probably up to 75 depending on card thickness.
There is also a single slot for those mini cards from pharmacies and the like. I rarely use those personally, but this lets me store them “just in case”. Easy access finger cutouts. Holds about 20 mini / keychain cards.
Can float free or has holes for bolts or screws if you prefer to secure it. Can also use on top of a desk of course.
No supports needed (printed flat side down)
Recommend at least 4 solid top layers to make sure any infill is hidden
Personally I like 20% Gyroid infill for a nice strong model, but of course you can tune the infill percentage and style as you see fit.
Post your makes and earn your Prusameters!
If you haven't seen my other models, check them out. There are a variety of other practical prints you might be interested in. Feel free to follow me too if you'd like.
And of course if you like this model, throw me a like.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
MakerCameron
