December 9, 2024
Description
This in a vase version of my Dragon Scales Bic Lighter Case.
You may be interested in some of my other vase designs!
I scaled my print up to 200mm tall or around 315%!
When using vase mode I tend to increase the outer wall thickness to somewhere between 0.6mm and 0.8mm. This helps close the gaps where there are steep angles in the vase. Just be sure to check the preview in your slicer before printing!
Printable in vase mode or standard print (if you set the infill to 0% and 0 top layers) and scales up very well!
Are you interested in selling your prints of my designs? Join my Printables Club, and start making 💰 with your idle printers!
License:
Standard Digital File License
Grandpa 3DPrints
