September 14, 2023
Description
This thin nozzle tip fits a 3m marine silicone 3 oz (88ml) tube, but will likely fit other tubes (silicone, grease, other sealants, adhesives, etc.) of similar size or shape.
The nozzle tip is quite fine (i.e. small outlet diameter) for controlled placement of silicone. It can be cut closer to the screw end if you wish a larger diameter hole. Also has a faceted collar for better grip as you screw it on.
I suggest printing at 0.12 mm layer height or similar, and 3 walls. I used PLA.
9/13/23: When using PLA, the nozzle is quite brittle to snip or cut the end for a larger opening. PETG might work better in this regard….
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
Merlwynd
