3dupfitters corner bracket with male link for articulating raspberry pi camera

I am using an enclosure from 3dupfitters for my Prusa MK3 and I wanted to use the multicam possibility offered by octoprint.
Only problem was to find an elegant way to position the second web cam in the enclosure knowing I am already using a raspberry pi camera installed with the amazing Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m.

The system is so nice I have decided to reuse it for my second camera. For this purpose, I have purchased an Arducam 8MP 1080P USB Camera module which is similar to the raspberry pi camera but a little biger.
https://www.arducam.com/product/b0196arducam-8mp-1080p-usb-camera-module-1-4-cmos-imx219-mini-uvc-usb2-0-webcam-board-with-1-64ft-0-5m-usb-cable-for-windows-linux-android-and-mac-os/

I remixed the case to fit the module with the previous mentioned attachment system : https://www.prusaprinters.org/prints/55649-arducam-imx219-usb-camera-case-for-articulating-ra.

To mount the new bracket once printed it is important to mount the first link prior to mounting the bracket back to the enclosure. But the nut on the face facing the outside of the enclosure.
Also for cable management you can use the pretty l shape bracket to use a zip tie to hold the usb cable from the additional camera. https://www.3dupfitters.com/blogs/news/mount-stuff-on-your-enclosure-with-new-bracket-design

In a nutshell, it is a remix bracket for the 3dupfitters enclosure to mount a new web cam. No support needed.

Print instructions

Rafts:
No

Supports:
No

Resolution:
0.2

Infill:
20%