December 9, 2024
Description
I wanted to create a case with a thicker body and more weight. This one has a really nice hand feel to it!
The fit is very snug so that the lighter will not fall out, and there's a hole in the bottom to help remove the lighter when it's time to change it.
You might be interested in my other Bic Lighter Case designs!
Remove the label on the lighter with a blow dryer or heat gun to make it easier to insert and so that the label won't get shredded while inserting it into the case.
Note: This fits a standard Bic lighter without a plastic, shrink wrap design.
Layers: 0.1 ~ 0.2mm (I used 0.1 layers on the tri-colored prints and 0.2 layers on the gold/black print in my pictures)
Walls: 3-4
Infill: 5%
Speed: slow it down to make the outer surface clean and reduce ringing on the pattern edges
Need a quick print to test your first layer?
Are you interested in selling your prints of my designs? Join my Printables Club, and start making 💰 with your idle printers!
License:
Standard Digital File License
Grandpa 3DPrints
