The Other First Gen Balls - Pokeball

Hello again!

I know that I had already published the top caps before but I have made small changes to them looking for easier printing and now I am adding the STL and 3MF files to make the 3 remaining balls of the first generation: Superball, Ultraball and Masterball. I leave the files to print each cover in parts or complete. 

These files are only to print the upper covers, the rest of the pieces to assemble the Pokeballs are in the publication of my Pokeball model. From there you will need to download the files from the BOT folder (either 3MF or STL).

As with my model of the pokeball, I must clarify that they are not designed to be completely printed, you will need two 3mm x 1.5mm magnets and an 8mm barrel hinge to join the upper parts with the lower parts.

Lastly, I recommend you to print the outer parts with a layer height of 0.1 to 0.15 mm. The model is designed so as not to have to paint practically any part (although I wanted to do it). 

I hope you like them as much as my model of the Pokeball did and Happy Printing!

Print images by: @0xBene_139836