DC-DC LM2596 Enclosure with features

A 3 part enclosure for LM2596 DC-DC converter series.

The LD2596 module's main task is to provide a lower voltage for a secondary circuit. For example from a 3D printer main power supply, from the 12-24vDC main power to the 5.3vDC required by a RaspberryPi. The LM2596 module is also usefull for temporary bread board alike circuits with its fast and easy monitored setup. It can be usefull too in a fixed setup to monitor input/output power voltage.

Features :

• Hole to access the variable resistor for easy setup
• Push button to aleternate In-Out voltage display
• Pass-through cable management (up to 3mm diameter cables)
• Holes for pannel/wall mount

Required hardware :

• 2x DIN912 M3x6mm screws (or Hex-Socket plastic thread) to hold the board on the base
• 2x M3x4x4mm Bronze inserts in the base to fix the cover
• 2x DIN 912 M3*12 screws to fix the cover in place
• 4x DIN 125 washers for DIN912 screws (preferabily nylon ones)
• 2x 3x6mm screws or longer to fix the enclosur on any surface (optional)
• 4x Metal ferrules to protect wire connexions

Not affiliated links :

LM2596 module : https://fr.aliexpress.com/item/4000013423897.html?spm=a2g0s.12269583.0.0.21418af2cEuJCi

Ferrules : https://fr.aliexpress.com/item/32886690121.html?spm=a2g0o.productlist.0.0.69dc332dD4J37B&algo_pvid=29fee3d0-52cd-418a-b1bb-b158e6d4dd14&algo_expid=29fee3d0-52cd-418a-b1bb-b158e6d4dd14-6&btsid=26c264e7-4892-4961-b2f5-4b50eaf8244f&ws_ab_test=searchweb0_0,searchweb201602_9,searchweb201603_53

M3x4x4 Bronze Inserts : https://fr.aliexpress.com/item/32853368838.html?spm=a2g0o.productlist.0.0.5cda10435vBhPz&algo_pvid=66571587-226f-47b6-92a8-09be64b0bc5e&algo_expid=66571587-226f-47b6-92a8-09be64b0bc5e-1&btsid=36503747-f6d5-4475-8e3b-10892cbcf1e9&ws_ab_test=searchweb0_0,searchweb201602_9,searchweb201603_53

Print Settings

Printer:

Reprap

Rafts:

Supports:

No

Resolution:

Infill:

High

Filament:

Plasti Mladec PLA

Khaki + Orange

Notes:

Category: Hobby