PSU Cover with 4 poles switch

Hi everybody,

This is a fast print Power Supply holder for 113x51mm fanless model, lenght does not matter as it only protects the exposed terminal. The part is meant to use a budget 4 pole power switch. It uses screws to be mounted on a base and zip ties to secure the Power Suppy in place. Very trongly actually.

BOM :

2x M3 screws (type depending of your base's material)

1x 2mm wide Zip Tie

1x budget 4 poles power switch, any colour link : https://fr.aliexpress.com/item/32830810437.html?spm=a2g0o.productlist.0.0.2bb1119bvXLx5E&algo_pvid=1fba8fb1-c3bd-4ca4-aedc-50085f99bdc4&algo_expid=1fba8fb1-c3bd-4ca4-aedc-50085f99bdc4-4&btsid=2374b398-f0f4-4a15-b8f7-6c1f04f0dfa3&ws_ab_test=searchweb0_0,searchweb201602_9,searchweb201603_55

Please note this PSU cover is a part of my printer's setup : https://www.thingiverse.com/thing:3997712

Print Settings

Printer:

Reprap

Rafts:

Supports:

No

Resolution:

Infill:

100%

Filament:

Plasti Mladec PLA

Pearl red

Notes:

Category: Electronics