Quicksilver Backpack replacement fastener

Just a replacement fastener for my trusty old Quicksilver backpack. There's two parts : the male one pass thru a hole in the pocket, the female one encloses a hole in the flap clutch. Each part is a friction fix, but I recommend to glue the parts with 5mn epoxy.

Female part :

1x base with lip (printed)

1x cover (printed)

Male part :

1x base (printed)

1x twister (printed)

1x cover (printed)

1x M4x10mm button-head screw.

1x M4x6mm bronze insert (https://fr.aliexpress.com/item/100pcs-M4-6-4-Brass-Thread-Insert-Nut-Copper-Injection-Knurled-Nuts-OD-6mm-M4-4/32478530885.html?spm=2114.06010108.3.30.YYIwWR&ws_ab_test=searchweb0_0,searchweb201602_7_10152_10065_10068_10150_10136_10137_10060_10138_10062_10141_203_10056_10055_128_10054_301_10059_10099_10103_10102_10096_10144_10052_10053_10142_10107_10050_10143_10051_10525_10529_10084_10083_10080_10082_10081_10110_10111_10112_10113_10114_10516_10515_10037_10032_10078_10079_10077_10073_10070_10122_10123_10124-10150_10152_10515,searchweb201603_1,afswitch_1,ppcSwitch_3,single_sort_0_default&btsid=318e8db0-fdbc-4422-8264-edc2af00b8e3&algo_expid=1d39843f-d124-41a4-a5b7-955e0e209652-3&algo_pvid=1d39843f-d124-41a4-a5b7-955e0e209652)

Print Settings

Printer:

prusa i3, CoreXY, Tarantula

Rafts:

Supports:

No

Resolution:

Infill:

85% (solid infill)

Notes:

Category: Replacement Parts