JBL Wireless microphone holder with 3/8 thread

I was looking for a holder for JBL wireless microphones. These mics are thick, so I had to draw my own mount.
The print consists of two parts and they are connected by an M6 screw.
I printed the holder from TPU and the other part, in which there is a thread, is printed from PLA.
The holder has an inner diameter of 30 mm. JBL wireless microphones have a diameter of 35 mm, so they hold well in the microphone holder.
I printed it with 0.6 nozzle
infill 45% no support
I use the holder and I am satisfied with it, so I offer it to you as well