Sovol SV06 SD adapter

I wanted a support that doesn't require screws or cable ties and that integrates well with the design of the printer. I decided to fix it on top of the gantry because it was the nearest and most solid place to interact with.
There is a cable holder too that you can use to fix in place the extra flat wire on the back of the vertical extrusion.

I printed everything with a 0.3mm layer thickness. The SD adapter requires support on the inner side (shown in pictures).

To mount the adapter just slide in from the front of the printer on the left upper corner (it will click). The SD card should fit by interference in his slot and stay in place firmly.

Card adapter: TF to SD 48cm from on Aliexpress.

EDIT: for some reason, the LOCK pin on the adapter seems to move when I insert the full-size SD inside the extender causing the print to stop after some layers. I fixed it by putting tape on the adapter as shown in the photo.

Here you can find all the mods I've made to my SV06.