10th Scale RC Car Hanger (No Wall Drilling) (No tire marks on wall)

Description

• No Drilling required.
• Keeps your RC models off the ground, taking up valuable floor space.
• Keeps your tires away from the wall to avoid marking it.
• Strong and rigid design to ensure it can take the weight of most RC vehicles.      

Required Hardware

To secure the hanger you will need to M3 self tapping screws long enough to get a good bite of the surface your attaching too.

Other Uses

This hook can also be used to hang cables, headphones and other various items you want to keep off your Floor and shelves .

Printing Tips

I printed the model in PETG and designed it to be printed without supports, depending on how good your printers cooling is you may want to add supports for yours.

Use an infill no lower than 20%

Disclaimer

I've only been able to test with the models i have myself however the hanger will fit a large range of 1/10 scale buggy's as well as both Arrma's 1/10th models and Traxxas.

Updates

02/09/23 : smoothed edges and Performed weight reduction and optimised the amount of material used. also Improved the location of the screw holes for easier access.