OpenRC GoKart

This is an OpenRC Project for a Go-Kart

As Some friends and I decided to create an extra class for hobby driver with self printed RC cars ... we started this project. We will try to reuse as much as possible from other projects so that it can be reused even here. (Less engineering and of course a higher reuse of components and knowledge)

PartList:

Screws:
4 x M3x16 lenshead
4 x M3x10 lenshead

10 x M3x12 countersunk
13 x M3x10 countersunk
30 x M3x8 countersunk

Nuts
14 x M3

Bearings:
4 x 12x18x4 (Rear Achsle and Steeringrod)
4 x 8x12x3,5 (Wheels Front)

There will be also a driver in the nearer future which should be able to steer and move the head to where it drives.

Feel free to comment ... as already said ... this is currently under construction.

This design was published to be used and printed free of charge and not to be distributed or sold for profit. (My contribution to RC Hobbyists to try and keep it as affordable as possible)

Not official but an “assemble instruction” if needed ;)

 

 and another one ;)