Ultimate Gamesir X2 Legion Y700 Tablet Grip

This is a 4 piece model that enhances a Y700 tablet and gamesir x2 pro controller to be more ergonomic. Parts of the design are inspired by https://www.thingiverse.com/thing:5907243 .

Optionally, you may want to print the “Gamesir Spacer” from that above project to cover the springs on the back of the unit.

I printed the handles/grips upright with a brim, the cross bar face down (diagonal to fit on print bed), and the tablet support face up. All were printed at .2 with a .4 nozzle on a modified Elegoo Neptune 2S in matte black overture PLA.

All parts fit together using 6 M3x6 screws, any adhesive is optional. Depending on your print tolerances you may need to use a smaller screw to open up the holes a bit.

The right side handle has a hole/channel to accommodate a usb-c extender or cable (with a small plug). If you don't want it you can print the left handle mirrored (they are the same other than the hole).