7 inch touchscreen holder

if using this 7 inch 1024x600 LCD D display with bracket-h Full viewing angle panel at 178 degrees for raspberry PI 3B + 4B

I used a Motedis angled Universal Monitor Mount VESA 75+100 for mounting on my 3060 extrusions on the Ratrig V-Core 3 ThreeFiddy.5

Add m3 heat inserts from the back for the Vesa and to the front for the cover

I added the stp file for the back, so you can add a chamfer for using countersunk bolts for the screen (I drilled them out a tiny bit after printing)

Also added .3mf file combining the angled mount with the backplate printable as one (SuperSlicer) and also an .stl file with even less holes, go bananas !

This is a remodel of my own https://www.printables.com/model/279988-szfydosh-7-pi-touchscreen-3030-case then again not.

I printed it in PETG (.3 layer with .5 nozzle, 3 walls, 30% gyroid infill, no supports)