NO MORE CABLE TIES: cable clips for wiring (e.g. Prusa enclosure) / Nie wieder Kabelbinder: Kabelschellen zum verkabeln

Hello friends from all over the world :)

This is my first 3D-model on printables.

A friend of mine has the original Prusa enclosure for his mk3s+. With the air filtration system and the LED strip, there are a few wires to guide along inside the enclosure.

Using cable ties (zip ties) can be time consuming and a bit fiddly. Furthermore, when you want to change something, you have to cut the old cable ties off, so you have to throw them away and buy new ones. Since stinginess is part of the swabian culture, I don't feel comfortable with that ;) So I decided to design a cable clip which can be reused several times. Since it is a part for Prusa accessories, it has a hexagonal shape.

Since the small clips were really tiny, I just changed the clip in L-size and added a XL-size. With PLA, it works for me. For the newest version (01c) I added hemispheres so that the clips do clip in place. The shape looks a bit like yin and yang now.

All edges have a small fillet, so the danger of scratching cables is pretty low, especially when you compare them with the sharp edges of cut down zip ties.

If someone likes the design, it would be great if you also give it a like and post a make ;)

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

This model is free for non-commercial purposes. If you'd like to sell it or use it in a commercial environment, just write me a message, we'll work something out.

Anything you print or do, you do it on your own risk. Be safe and have fun :)