Cutlery Tray

Customized a cutlery tray to nicely fit a drawer for a friend of mine. Dimensions of the print are 176x218x50mm

This file is still mid print as I'm uploading, attempting no raft on G10. My sheet wasn't the flattest and some of the holes had trouble starting. You definitely want your bed flat, level, and tuned properly for this one.

Will try to remember to update some info after it's finished.

Update

Printed well enough to be usable, though a better tuned printer would certainly have handled the overhangs better. Had a snafu about 22 hours in, but was able to recover - not a direct problem with the actual print - I moves some things and a cable snagged the bed causing a layer shift. Had some corner lift after a while, but this thing also took up almost my entire print bed, and I didn't have it enclosed. I've since swapped to a 1/16" G10 sheet for my bed which prints better than the 1/8" sheet I used for this mammoth print. Final time was around 36 hours on my printer.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

.2

Infill:

Filament: Prusament PETG Pistachio Green

Category: Kitchen & Dining