August 25, 2023
Description
I use these Sterilite “Shoebox” containers for a multitude of things and I could not find a divider that fit my needs so I made one. Very simple print to use up those small ends of rolls. Each side uses about 35g of filament. Walmart (USA) typically has them listed as 6qt and sell in a 10pk for $11. I will link them below:
https://www.walmart.com/ip/Sterilite-Set-of-10-6qt-Storage-Bx-White/124979359?athbdg=L1102
Print with grid infill at 25% with 0 top and bottom layers to get the “grate” look!
Print Suggestions:
Layer Height: 0.2
Infill: Grid
Infill %: 25
Top Layers: 0
Bottom Layers: 0
To fill the container, print the file 2x and put the 90* vertical edges in the center. If you want the pieces to stay together glue works well.
License:
Creative Commons — Attribution
8
King Ant
