Ortur LM 2 Pro S2 - Cable Support + Mount for 10W LU2-10A Laser Module

I upgraded my Ortur LM2 Pro S2 with the new 10W LU2-10A laser module and needed something for cable management and a mount for the new circuit board that comes with the laser module. As additional information - our Ortur Laser is mounted inside the original Ortur Metal Case!

Thanks to @henchy_393989 I found his awesome cable support structure and finally modified it to my needs.

All you need are some zip ties, 2 new M3x10 screws on either side of the cable support parts and 2x M3x8 to hold the board in place. On this side I cut threads in the two holes. It will keep it neat later. The right part also contains a hook that fits into the x-axis aluminum profile. This gives both parts enough support so they don't fall off when the cables are attached inside. I think my pictures tell you everything you need.

Print with supports!

If you're wondering about my laser vent, I installed it on the right side of the case and made a matching mount for an additional 80mm fan. You can find these parts in my published parts.