Lithophane Moon Lamp 124% Remix

I printed the original moon lamp by @FrankDeschner but it met an unfortunate faith when my daughter knocked it onto the floor.

So i decided to rebuild it…Bigger…Better…More stable!

My printer has a build volume of 256*256*256, which roughly equates to the original globe scaled up by 124%.

I thought i could improve the stability and child proofing factor by adding more weight to the legs, ie designing a whole new base for the globe. Also, just scaling up the legs wouldn't work as the hole for the bulb fitting would also be scaled up. I remixed the original tripod legs into a sturdier construction and hey presto…moon lamp 2.0.

Inside is the following lamp fitting:
https://www.clasohlson.com/se/Lamphållare-med-tygklädd-sladd-Northlight/p/36-6234

and an Ikea Trådfri e27 RGB light bulb.

The globe was printed with 6 walls, 6 top layers, 6 bottom layers and no infill. This is almost a 2 day print even on the BL.

The stand was printed with 5 walls, 5 top layers, 5 bottom layers and 15% infill.

Happy printing!