Honeycomb Storage Wall Valve Index Controller Mounts

I loved gingersteve's controller wall mounts, but I wanted to add it to my Honeycomb Storage Wall, so I added a big connector to the back.

Just a warning, depending on the print, these can become loose over time. I'd recommend a bit of glue to permanently affix the mounts to the HSW.

Print Settings

• Layer Height: 0.2mm
• Perimeters: 4
• Infill: 10% Gyroid
• Auto-generated supports: Yes (build plate only)
• Support style: Organic

Filament:

• Overture Silk Gold PLA