May 28, 2024
Description
Similar to an “acro handle” this mounts above standard brake handles for a higher pull point without taking a wrap (which twists brake lines). Designed for two fingers use. Covers the knot and grips the line so that it will not slip upwards. Designed for 2mm brake line (as used on Ozone gliders). Can be installed without untying brake lines.
Requires eight M2x16 screws and nuts per pair. Nuts fit tightly in recesses (for retention during assembly). Tap in place. with small hammer.
For easy identification, print one in red, one in green!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
11
gregas
