Under desk quick release mounts for Lenovo docking station

You can hide the Lenovo docking station under the desk with these mounts and remove it again in no time.

The two triangular brackets are screwed under the table near the edge, using 3mm screws. The two holders are slid over the docking station on the right and left.
Afterwards, only the holders have to be inserted into the triangular brackets to mount the docking station under the desk.

The docking station can be mounted in the holder according to your needs, either with the numerous inputs and outputs facing downwards, or - if you place the triangular holders close enough to the edge of the table - with the inputs and outputs facing upwards.

If you still want to use the power button on the docking station, I modeled two alternative holders with a matching hole (depending on the orientation of the docking station, a holder with the hole at the top or bottom can be used). The docking station is then placed in the holder in such a way that the button remains operable under the hole and can also be quickly felt with the fingertip.