![Fairphone 4 Rearcover [default] 3D Printer File Image 1](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/564339/images/4520460_dbca6ec0-fc2f-4951-9e65-fc25b66dcd1d/2023-08-26_17-34-31.jpg&w=828&h=828&output=webp&q=100&n=40 "Fairphone 4 Rearcover [default] 3D Printer File Image 1")
![Fairphone 4 Rearcover [default] 3D Printer File Image 2](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/564339/images/4520459_3e049e37-df45-4b7d-815b-398dd9ace167/2023-08-26_17-32-07.jpg&w=828&h=828&output=webp&q=100&n=40 "Fairphone 4 Rearcover [default] 3D Printer File Image 2")
September 27, 2023
Description
I developed this rearcover by scanning-measuring. Just because the original one start to develop some cracks after some time.
Unfortunately, installing this rearcover you will lose the NFC antenna, which is glued on the original rearcover.
Just print a 0.2mm layer thickness. My favourite material is PETG because of it's flexibility, but you should be able to achieve a functioning cover also with PLA.
The cover prints in two pieces, to accomodate for the back cameras protrusions.
When you are done printing you are supposed to glue the two parts together permanently.
Feel free to experiment with different bed textures (photos were taken with Powder coated PEI sheet by Prusa)
If you don't want to use glue, I also provide a thicker version, which will protect the cameras without that protrusion.
Check out the FLAT version here.
License:
Creative Commons — Attribution
ᴜ ɴ ʀ ᴇ ᴀ ʟ
