September 8, 2023
Description
Rules
1.) Cup must be printed as provided(No changing dimensions) and out of PLA.
2.) When recording attempt there must be a timer running in view of the camera for example a phone, stopwatch, computer e.t.c.
3.) The cup can be postioned on top or bottom to start. Just as long as it ends on the opposite side.
4.) Start with the bucket on the ground with the claw closed and 20cm away from the bottom edge of the cup.
4.) Post attempt to the Flip Cup challenge channel inside of "Challenges" on Discord.
MiniSkidsteer model Link: https://www.printables.com/model/544937-v20-3d-printed-rc-skidsteer
ProfBoots
License:
Creative Commons — Attribution — Noncommercial
8
ProfessorBoots
