Clamp adapter for Joule circulator

I needed to hang my Joule sousvide circulator on a larger container, a cooler.   I didn't have the factory option to facilitate this, the Joule Big Clamp.   So I modeled this part that the regular wire hook attaches too.  I printed it in PETG, and then attached to a plastic spring clamp that I already had in the workshop with a M3 stainless socket head screw and nut.

Needed: 

• Some sort of clamp
• M3 Socket cap screw (appropriate length I used 16mm)
• M3 nut

I printed with 4 perimeters and 20% cubic infill in PETG with .4mm nozzle and 0.28 layer height.  Can be printed without support cleanly as there is a 1 layer bridge built in that the screw can push through for the countersink. 

Make and use this at your on risk.