Christmass tree with light

I designed various christmas trees for mounting led lights. I used led lights with a length of 5m with 50 led lights. First connect the bottom stand with the tree and then start pulling the led lights from the bottom through the bottom hole. Then you pull the led lights through the different holes so that the lights are evenly distributed and do not stay in the holes and between the holes from the outside.

Printing instructions for box and holder:

• box cover printed on the edge with the hook perpendicular to the print surface, so as not to break the hooks in use
• filament PLA
• 0,2 mm layer height
• with support for Box cover and Trees 

I wish you a nice print and a nice interweaving.