September 1, 2023
Description
Remember! Eyes are very important and airsofting is dangerous without protection. I use an M3 screw to reinforce these as much as possible but they are still just plastic. I make no guarantee that these will withstand direct impact.
I wanted a quick and easy way to mount my goggles to my helmet and this seemed like a pretty good solution. Use two M3x14 (or longer) screws and nuts to hold the two pieces together. I used some bungee cord from an old mag pouch to make the band for the goggles.
These have a satisfying snap into my helmet. There are 2 versions. One for the top-horizontal rail and another for the bottom-verticle rail. The top rail is universal for either the left or right side. The lower rail is not and must be mirrored.
Print out of a durable material such as PETG
Supports are required to get the strongest orientation
License:
Creative Commons — Attribution — Noncommercial
11