Bullet / Banzai Bill Nozzle Holder (Magnetic)

Remix of Martin Moores Bullet Bill / Banzai Bill model to store 19 E3D V6 / Volcano nozzles. You can customize your Bullet Bill to store everything you want. Theres a magnetic and a screw version available.

Nozzles are locked in place by the top part, so they wont fall out if you turned it upside down.

I haven't printed the screw version yet, but I am confident that it will work as well.

Upgrade Extender:
The extender is used to store a bigger amount of nozzles or other items like bullets. The extender doesn`t work with normal magnetic base. Use the customizeable base for the extender. A screw version for the extender is coming in the future. The customizeable base works also without the extender but the nozzles are not locked in place.

Download the files for the eyes, the teeth and the screw top here:
https://www.myminifactory.com/object/3d-print-bullet-bill-26743

Print instructions

Use your preferred material.
Best color combination:
Black for the base and top/head. White teeth and irises. Red insert in red

Supports needed for these models:

• teeth
• base on the magnetic version (see picture)

Assembly instructions
If the parts dont fit at first, try putting them in hot water for a minute.

• Insert the red insert into the top/head part
• Then insert to lower and top teeth, this will lock the red insert in place
• Insert the iris into the eyes and insert the eyes into the sockets

The magnetic version uses 12 5x1 mm magnets which are glued in place with superglue.