Small box and stand for soldering tips for Pinecil or TS100.
The case is designed for short tips (88 mm length).
Adjustment for longer tips:
In case use have “normal” (105mm long) ones you can adjust the model in following ways.
adjust length parameter in fusion (one click edit), add extra 15mm.
or alternatively in Prusaslicer
Cut the cover in slicer and scale Z axis (+15mm) of top part (one closer to print bed). Make sure you do not scale the part where the small click pimple is.
It may work to scale the whole cover, because there may be enough clearance on the click thing. This is not tested though.
Design adjustments
Fusion 360 as well as STEP model is attached. Happy editing :)
Clearances
lid and base have 0.2mm clearance (0.1mm on each side)
Yourigh
