Here To Slay Card Holder for Base Game + Expansions and Sleeved Cards

I recently bought the two available Here To Slay expansions. I like to put sleeves on the cards to protect them, but they will increase in volume and so don't fit 'vertically' in the original box anymore. Also, the sleeves are a little bit bigger than the card itself so they won't either fit 'horizontally'. I designed this model to replace the original plastic card holder inside the original box, so you can carry your base game and expansions with sleeved cards without bringing two separate boxes and worrying about damaging your sleeves and making them look bad. It also has some space to put your dice. To remove your cards you have to remove the 3D-printed insert first. To put them back place first the latter and then store the cards.

The main benefit of using this insert is that there's a lot of tolerance for the sleeves to have a little play and do not force the card to fit in the box and that the sleek design saves you print material and time, about 97g of material (~ 32m - 2$) and 6 hours of print.

Print Settings

Printer Brand:

Anycubic

Printer:

Rafts:

No

Supports:

Resolution:

0.3

Infill:

Category: 3D Printer Accessories