Cable Holder with Secure Clip

If like me you are tired of using cable holders that do not allow to use ticker fast charging cables or that your cable is always falling of the slot, this is the solution for you.

To start, I may do smaller sizes, you have 5 slots with a securing clip that will not let the cables go anywhere. On the plus side, you can also fit 5mm cables with the large slots.

Need to get the cables of? Easy, lift the clip, take the cable and reposition the securing clip without effort.

PRINT SETTINGS

• Nozzle: 0.4 or 0.6 (I printed with 0.6)
• Layer Height: 0.20
• Infill: 20% to 100% 
• Supports: No
• Material: PLA+