Wandering clock stand for Desk/bookcase with integrated wall mount -easier build - no ikea clock required - geneva drive

Important: pause at about 7mm when printing the frame to insert two M4 nuts as they are dropped into the cavity and then enclosed in the print

This is a frame and stand for the wandering clock model:
https://www.printables.com/model/327198-improved-wandering-hour-clock

stand uses two m4-12 bolts and nuts

this replaces the CentralGearHolder.stl in the original set of files, this also eliminates the need for an ikea clock and the associated drilling/modification of one, so you also will not need those templates

I also recommend using sufficient infill on the narrow parts, I printed at .30 with 50% gyroid infill on the hook and main structure