D20 Lamp - Remix

I remixed the D20 Lamp to reverse the border and number orientation. This way I could achieve a multi-color print with a simple color swap at a layer height. And also when the light is off, the numbers would remain clear and visible. I started with Gold for mine, and at layer 5 for the color swapped to white when printed at 2mm layer height and .4 nozzle.

Issues - Because it is printed opposite, the corner peaks can warp or deform. I did not use any supports, but after the print i would trim or round them a bit. Nothing major in my opinion, but something to be aware of. 

I also mistakenly modified the magnet hole at only 1mm deep vs original 2mm.  So I have included blank tiles for both 1mm and 2mm. All numbered out tiles are text edited in Bambulab and assembled, so switching tiles or text/number should be relatively easy if you choose to go that route. Hope you enjoy. And thank you again ChrisIsMe for this awesome print.