September 2, 2023
Description
Coaster with a clef for music lovers. Looks amazing on your table. The coaster is 10 cm (3.9 inches) in diameter. Print the clef and the grid in any contrasting colors you like. Glue is required to put the parts together.
Printer Brand:
Flsun
Printer:
Flsun V400
Rafts:
No
Supports:
No
Resolution:
0.2 mm initial layer, 0.2 mm layer height
Infill:
10 &
Filament: GIANTARM, TINMORRY PLA Red, black, yellow, blue
Notes:
Should be printed in PETG, if you would like to put containers with hot liquids on the coaster. Otherwise PLA can be used without problems.
Print the clef first and then the grid. It is most easy to glue the clef into the grid when the grid is still on the printbed.Clef coaster assembly part 1
Print the clef first.
Clef coaster assembly part 2
Then print the grid.
Clef coaster assembly part 3
When the grid is still on the printbed put glue into all the insets and insert the clef. Press the clef firmly down. It should fit well. Let everything dry. Remove the coaster from the printbed.
The clef coaster was designed with Blender.
License:
Creative Commons — Attribution — Noncommercial
Dreamtime24
