Above Monitor Speaker Stand

Attach your speaker to your monitor stand pole, made for 35mm wide poles

4 screw holes in the plate, but you can also use double sided tape or just simply friction fit the speakers. I am using Klipsch R-14PM which are 147x190mm base.

This design uses:
 

• 2x M4x25mm screws (Attaches the plate to the pole)
• 1x M4x40mm screws (Holds the pole to the clamp, not obligatory)
• 2x M4x20mm screws (Holds the clamp tight on the monitor arm, not obligatory)
• 3x M4 nuts (Not obligatory if you didnt use the 40mm and 20mm screws)

Step-files included if you wish to edit it to fit your desktop setup