January 13, 2024
Description
Imagen encontrada en Pinterest. Autoría de Francesco Francavilla. Desde aquí, mi reconocimiento y agradecimiento por el diseño original.
¡¡El resultado impreso es alucinante!!
Las marcas de los filamentos usadas en el modelo impreso no son las especificadas en las instrucciones de Hueforge, ya que uso otras diferentes, aunque los colores son similares.
Altura 230, ancho 149,29 mm.
----------
Image found on Pinterest. Authored by Francesco Francavilla. From here, my recognition and gratitude for the original design.
The printed result is amazing!!
The filament brands used in the printed model are not those specified in the Hueforge instructions, since I use different ones, although the colors are similar.
Height 230, width 149.29 mm.
----------
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #17 (1.44mm) swap to White for the rest.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Deadius
